Oscam Config

cylib · 20. März 2012, 21:02

Running E2 HDF1.2 on my Amiko. Set up C lines on CCamd and work quite well. I have not managed though to run Oscam. There are 2 Oscam in emu manager and 2 Oscam reader files in var/keys oscam and oscam_emu. Which one should I set up. I set up both like

[reader]
label = cccam_reader
enable = 1
protocol = cccam
device = blabla.dyndns.org,12345
user = alien
password = alien
inactivitytimeout = 1
reconnecttimeout = 7986488
fallback = 1
fix9993 = 0
group = 1
lb_weight = 100
cccversion = 2.0.11
cccmaxhops = 15
cccmindown = 1
ccckeepalive = 1
It does not work. Should I erase everything else?Thankful for any help

Googgi · 20. März 2012, 22:35

Please start your prefered oscam ( or oscam-emu) in Emu-Manager.

After that the Webinterface is active under Port 88 >>> IP:88 in your Browser

In the webif you can easily make your changes like that: Oscam-ymod by Yuriks für alle

cylib · 21. März 2012, 07:33

Thanks for respond
Gone into webinfo and saw that I had 3 servers connected all with same C line settings and all connecting and closed by remote server. user/passwd are correct and server ok since when going back to ccamd it immediately connects. In Readers why I have 3 all with same login details? Should I erase the 2 and leave only ccam-reader1?
Sorry but I am a novice in oscam

cylib · 21. März 2012, 08:06

Ok
Deleted all settings I had previously put by ftp in oscam.readers.
Went into webinterface and put in ccam.sever.1 my hostIP/port and my user/passwd ticked on enable but again not connected. Can we please have an idiot guide for this?

Googgi · 21. März 2012, 18:59

Please go into Webif > FILES and copy the content of
1) oscam.conf
2) oscam.server
3) oscam.user

and post it here as "Quote".
privat data in oscam.server with xxx

cylib · 21. März 2012, 21:28

In webinfo in status it shows server and its IP but not connecting giving error. In files : File does not exist or no file selected!
But if I ftp to oscam server I see the settings I also see in webinfo/readers/ccam_reader/edit the server settings

Googgi · 21. März 2012, 22:26

You should see the Config-Files in your Webif under FILES, then click below... but anyway

copy the 3 oscam-files (conf+server+user) to your PC and show us the content.

cylib · 22. März 2012, 07:43

Here are the the files from var/keys/oscam_emu:
I have masked in red my settings
oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t19 build #0
# Read more: streamboard.gmc.to/oscam/brows…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
maxlogsize = 0
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_retrylimit = 1600

[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.208
aulow = 30
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 1
request_mode = 0

[webif]
httpport = 88
httphelplang = de

oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: streamboard.gmc.to/oscam/brows…/doc/txt/oscam.server.txt

[reader]
label = sky_irdeto_card
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
fix9993 = 0
detect = cd
mhz = 600
cardmhz = 357
ident = 1702:000000,000001,000002,000003
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = sky_v13_card
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = hdplus_card_white
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
fix9993 = 0
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 500
cardmhz = 368
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = hdplus_card_black
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
fix9993 = 0
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 500
cardmhz = 368
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = orf_card_cw
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
ident = 0D05:000000
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = orf_ice_card_cw
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
ident = 0D95:000000
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = orf_ice_card_irdeto
enable = 0
protocol = internal
device = /dev/sci0
caid = 0648
fix9993 = 0
rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219
force_irdeto = 1
boxkey = 48454C4C4F4F5246
detect = cd
mhz = 357
cardmhz = 600
ident = 0648:000000
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = mtv_card
enable = 0
protocol = internal
device = /dev/sci0
caid = 0B00
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = viaccess_card
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
lb_weight = 100

[reader]
label = cccam_reader
enable = 1
protocol = cccam
device = XXXXX.XXXXX.org,22221
user = XXX-XXXX
password = XXXXXhna8
inactivitytimeout = 1
reconnecttimeout = 7894064
fallback = 1
fix9993 = 0
group = 1
lb_weight = 100
cccversion = 2.0.11
cccmaxhops = 15
cccmindown = 1
ccckeepalive = 1

[reader]
label = newcamd_reader
enable = 0
protocol = newcamd
device = blablabla.dyndns.org,66666
key = 0102030405060708091011121314
user = user01
password = pass01
reconnecttimeout = 7894064
fix9993 = 0
group = 2
lb_weight = 100

oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: streamboard.gmc.to/oscam/brows…on/doc/txt/oscam.user.txt

[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
uniq = 3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1

[account]
user = usermonitor
pwd = pasword
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,20,21
uniq = 1
monlevel = 4

Googgi · 23. März 2012, 00:02

try this:

oscam.conf

[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = stdout
cwlogdir = /var/log/oscam/cw
nice = -1
saveinithistory = 1
lb_mode = 1

[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = dvbapiau
pmt_mode = 0
request_mode = 0

[webif]
httpport = 88
httprefresh = 10
httphelplang = de

oscam.server

[reader]
label = cccam_reader
enable = 1
protocol = cccam
device = XXXXX.XXXXX.org,22221
user = XXX-XXXX
password = XXXXXhna8
group = 1
cccversion = 2.0.11

oscam.user

[account]
user = dvbapiau
pwd =
group = 1
betatunnel = 1833.FFFF:1702

should run

cylib · 23. März 2012, 06:01

No it does not run.I just put what you posted and deleted all else.Even webinfo does not connect anymore. Tried to go here usrfile = /var/log/oscam/oscamuser.log to see the log but this file does not exist. Is it an oscam not installed properly thing? In spark but with a bit different set up in oscam.reader (user/psswd in 1 line) it works
Any more ideas? Thanks for support

Googgi · 23. März 2012, 06:59

Please enable logfile: (not usr.file; under Configuration > Global > Logging) and reboot your box.

Then try again, and you will have output under /var/log/oscam.log

please post this content (20 - 30 lines)

cylib · 23. März 2012, 13:58

In Configuration/global/logging both values set to 0-enabled no file was set usr file so I put oscam.log then save ,reboot but no file created in var/log.
I have worked with newcamd, mgcamd,ccamd for years with no problems but oscam seems to be out of league!!

Googgi · 23. März 2012, 15:38

There are two oscam installed.

i think you work on configs for oscam 1, but you are running the other

Thats why i said to you: make your changes in the WEBIF!!!
Then you cant make such a mistake.

cylib · 23. März 2012, 17:23

OscamEmu ymod has its files in var/keys/oscam_emu and Oscam120 in var/keys/oscam
I have started OscamEmu ymod rebooted Amiko opened webinfo and put in server IP/port and user/passwd and clicked enable. Then again rebooted and even gone by ftp to var/keys/oscam_emu/oscam.server and see that my configs are there. In webinfo I see it recognizes my server and tries to connect but fails.To make absolutely sure it is not a case of mixing up oscams I try the other oscam without changing server file.
All server configs are ok as are same in ccam and when I switch to ccam it immediately connects.
Is there a chance my oscam is corrupt? Can I manually reinstall it?

Googgi · 23. März 2012, 18:41

OK, that point is cleared.

Please post a status log to see whats going on...

cylib · 23. März 2012, 19:31

Started OscamEmu ymod and again through webinterface put my C line configs and reboot:
Log file:
# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: streamboard.gmc.to/oscam/brows…on/doc/txt/oscam.user.txt

[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
uniq = 3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1

[account]
user = usermonitor
pwd = pasword
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,20,21
uniq = 1
monlevel = 4

Cleared oscam.log and Loaded other Oscam emu and rebooted and got exact same in oscam.log
In webinterface User I see oscam trying to connect to server then connect successful ccam, then rejected group(no matching reader)
Googi thanks for your patience :danke:

cylib · 23. März 2012, 19:39

In webinterface
Readers/Choose edit
Description-Blank
Enable-Yes
Device- IP/Port
Group-1
LOadbalance weight-100
All rest -Blank

Reader specific settings for protocol cccam
User- user
Passwd- passwd
Version-2.0.11
Maxhop-10
Mindown-1
Reshare- -1
Want Emu- blank
Reconnect timeout- 7986488
Keepalive- yes

SAVE

If anything done wrong please tell me

Googgi · 23. März 2012, 19:42

i have posted working configs before. >>> here <<<

Did you ignored that?

Please delete your content and copy/paste my configs. Not forget to save.
After that > reboot!

If it ist not runnung again, then please post the log you see at the bottom in WEBIF > STATUS

cylib · 24. März 2012, 08:22

No I tried those configs before and not worked. Try again. Nothing stored in log files!! Below from Status, I masked server configs

2012/03/24 9:15:15 569408 c dvbapiau (0604&000000/0145/3C:FFFC): rejected group (0 ms) (0 of 0) (no matching reader)
2012/03/24 9:16:07 561D70 p tcp_conn_close(): fd=8, cl->typ == 'p' is_udp 0 label == 'cccam_reader'
2012/03/24 9:16:07 561D70 p tcp_conn_close(): fd=0, cl->typ == 'p' is_udp 0 label == 'cccam_reader'
2012/03/24 9:16:07 561D70 p creating thread for device XXXX.XXXX.org
2012/03/24 9:16:07 56B230 p connecting to cccam_reader on XXXX.XXXX.org:22211
2012/03/24 9:16:07 56B230 p XXXXX.XXXXX.org: resolved ip=XXX.XXX.XX4.2XX
2012/03/24 9:16:07 56B230 p socket open for cccam fd=8
2012/03/24 9:16:07 56B230 p connect succesfull cccam fd=8
2012/03/24 9:16:08 56B230 p proxy cccam_reader initialized (server=XXXX.XXXX.org:22211)

Googgi · 24. März 2012, 08:50

server connect is succesfull.

which card are in the cccam-server?
please switch to such a channel and post the STATUS-Log after that

Teilen